Abstract:【Objective】To address the lack of rapid methods for soil tillage layer thickness in salinized areas of Northwest China, this study investigated the applicability of ground-penetrating radar (GPR) to typical saline soils with high electrical conductivity, aiming to develop a rapid, high-precision technique for identifying tillage layer thickness.【Method】Five representative saline soil profiles were selected in Jiashi County, Xinjiang. A 200 MHz GPR antenna, combined with the fixed-offset method, was used to obtain the interface differentiation characteristics of electromagnetic wave signals along the soil profile survey lines. The point-source reflector method was used to determine the average electromagnetic wave propagation velocity in the soil and calculate the relative permittivity. The accuracy of the GPR-based identification was evaluated by comparing the results with the measured tillage layer thickness obtained from soil profile horizon delineation.【Result】The results showed that there were significant differences in soil water content, particle-size distribution, and salt content between the tillage layer and the sub-tillage layer in salinized soils, and that the dielectric properties differed considerably between the upper and lower soil layers. GPR electromagnetic waves formed reflective interfaces with reflection event characteristics at the lower boundary of the tillage layer, enabling accurate detection of that boundary. Across the five soil profile survey lines, the absolute errors of the identified layer thickness ranged from 0.6 to 4.1 cm, with relative errors from 1.5% to 15.3%, and the root-mean-square error (RMSE) was 2.6 cm.【Conclusion】This study, based on the GPR waveform method, establishes a high-precision identification technique for tillage layer thickness, providing a reliable approach for rapid acquisition of tillage layer thickness in soils with strong electromagnetic wave attenuation in salinized areas of Northwest China.